Prime Electronics

SELF POWERED ELECTRONIC LOADS
Features
  • Light weight and portable (only 3 Kgs). Easy to carry any where. (Carrying handle provided)
  • Self Powered - Does not require any AC input therefore can be operated any place. Ideally suited for testing of Solar panel, battery bank and other DC sources.
  • Precise settings of load current possible with multi turn pot provided for load setting.
  • Provision to connect fixed load in parallel to enable higher load testing.
  • Continuous precise display of voltage and current on specially designed meters.

 
MODEL NO : PE101-SE
Self powered Electronic load

 
Applications
  • For testing of Batteries in the field.
  • Checking of performance of Solar panel in the field.
  • Testing of Fuel cell.
  • Testing of DC Power supply on site or in Lab.
  • Can be used with fixed load to provide higher variable load to batteries or power supplies.
Specificatons Model PE101SE
Voltage Range 3  - 75  VDC.
Load Range 0 A -  25 ADC
Load Wattage 100 W (150 W max )
Load Voltage Range Selector switch
4 Position Rotary Switch
1st Position : 0 - 7.5 V / 25 A.
2nd Position : 0 - 15 V / 10 A.
3rd Position : 0 - 37.5 V / 5 A.
4th Position : 0 - 75 V / 2.5 A.
Load Adjustment Pot 10 turn pot with indication dial for the number of Turns and part of the turn
Voltmeter Displays DC Load Voltage in four scales 0-7.5V /15V / 37.5V /75V
Current Meter Displays DC Load current in four scales 0-25A / 10A / 5A / 2.5A
Load ON / OFF Toggle switch to turn ON and turn OFF load.
Load ON indication Green LED to indicate Load ON
Load input 4 position Terminal Board for HI input and LO input.
Current Limit for each TB is 15 A
Operating Temperature 0° C  - 50° C
Size
PE101SE 205mm(W) X 195mm(H) X 180mm(D)
Weight 3 Kgs.
Note :
No other AC or DC source is required to operate this SELF POWERED ELECTRONICS LOAD.
Specifications subject to change without notice.